[c-nsp] Limiting b/w per IP?

[Arie Vayner (avayner)]

Hank,

This is available on the 6500/7600 through microflow policers:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con
figuration/guide/qos.html#wp1571584

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Hank Nussbacher
Sent: Wednesday, September 23, 2009 08:48
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Limiting b/w per IP?

I haven't followed all the new bells and whistles in IOS so maybe 
something new is there that can handle this age old problem for me.

I want to be able to rate limit all IPs so that no single IP on an 
interface can eat more than say 20% of the available b/w (inbound and 
outbound).  I do not want to define every single IP of the segment in an

ACL but can if the solution is clean.  Not interested in protocol 
rate-control - just IP b/w.

Cisco snippets or URLs welcome.

Thanks,
Hank
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/