[c-nsp] Limiting b/w per IP?

[hank at efes.iucc.ac.il]

> Hank,
>
> This is available on the 6500/7600 through microflow policers:
> http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con
> figuration/guide/qos.html#wp1571584

Did I fail to mention that the router is much smaller? :-)

-Hank

>
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Hank Nussbacher
> Sent: Wednesday, September 23, 2009 08:48
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Limiting b/w per IP?
>
> I haven't followed all the new bells and whistles in IOS so maybe
> something new is there that can handle this age old problem for me.
>
> I want to be able to rate limit all IPs so that no single IP on an
> interface can eat more than say 20% of the available b/w (inbound and
> outbound).  I do not want to define every single IP of the segment in an
>
> ACL but can if the solution is clean.  Not interested in protocol
> rate-control - just IP b/w.
>
> Cisco snippets or URLs welcome.
>
> Thanks,
> Hank
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>