[c-nsp] ASA5520 which image should I use?
Ryan West
rwest at zyedge.com
Thu Sep 24 16:59:18 EDT 2009
Scott,
If you don't think you'll be using 8.x features anytime, I have a lot of luck with 7.2(4)33. Avoid the middle interim releases as there are a couple of nasty ISAKMP bugs. Getting to those downloads can be a bit of a challenge now, but this link still works, just go to the Interim Releases.
http://www.cisco.com/cgi-bin/tablebuild.pl/asa
-ryan
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Scott Granados
Sent: Thursday, September 24, 2009 4:51 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASA5520 which image should I use?
Hi, I'm running a pair of ASA5520 devices as VPN concentrators. Presently
there is a software image installed that seems very old and was actually
shipped with the devices before I arrived on the scene. I'm experiencing
some issues with bringing up L2L tunnels and figured that a firmware update
was in order. What version are folks using successfully? I was thinking of
going with the 8X code but not sure which one to choose. The features I'm
using are very basic and include simple client access and LAN to LAN access,
I'm not using the anyconnect or web VPN features at this point. Which image
do you think would fit the bill the best? Any pointers would be
appreciated.
Thank you
Scott
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list