[c-nsp] ES20 - Port Queues

[Anthony McGarry]

Hi,

I have a 7609 with a WS-X6748-GE-TX. When I show the port capabilities I 
can see rx-(1q8t), tx-(1p3q8t)
If I show queueing on an interface I see all the WRED and WRR queue 
configuration.
This is great, I can make changes and view changes.

I also have an ES20 and ES20+ line card in the chassis. When I show the 
port capabilities I see x-(NotDef-t), tx-(NotDef-t)
When I show queueing on an interface I see nothing for the ES20. For the 
ES20+ I get

Interface GigabitEthernet1/1 queueing strategy:  Weighted Round-Robin
  Port QoS is enabled
  Port is untrusted
  Extend trust state: not trusted [COS = 0]
  Default COS is 0

So the ES20 tells me nothing and the ES20+ only shows a subset of what I 
see with the WS-X6748-GE-TX.

Is there something I am missing in my config to show what queues I have 
available on the ES line cards '(1p3q8t)'
 From reading the line card configuration guides I can see ingress 
scheduling is not supported and egress is but when I configure a egress 
policy-map with my random-detect configuration I still see no queueing 
info for the ports.

Thanks
Anthony