[c-nsp] portchannel load balancing between L3 switch and router

[Pavel Dimow]

Well... what to say except..


Thank you :)

On Tue, Apr 6, 2010 at 1:41 PM, Oliver Boehmer (oboehmer)
<oboehmer at cisco.com> wrote:
>
>> I am trying to find a best way to perform portchannel load balancing
>> between ASR and 7600.
>> As far as I can see, ASR only has an option for manual per vlan load
>> balancing ie
>>
>> port-channel load-balancing vlan-manual
>>
>> and I understand that I can't have one vlan loadbalanced across two
>> portchannel members but
>> only the one at the time and second member is standby.
>>
>> Am I right or there is another solution?
>
> You seem to have missed the default per-flow load-balancing method, as
> described in
> https://www.cisco.com/en/US/docs/ios/ios_xe/lanswitch/configuration/guid
> e/lsw_cfg_flwload_xe.html. So by default both the ASR1k and the 7600
> balance the load on a per-flow basis.
>
>        oli
>
>