[c-nsp] Strange ME3400 PPS Limit

[Jean-Francois Levesque]

You are using "layer-2" template with no place in the TCAM for ip 
routes. If you are using this switch as a L3 switch, take a look at the 
"default" template.

For more info: 
http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_52_se/configuration/guide/swsdm.html

JF

Everton da Silva Marques wrote:
> On Wed, Apr 14, 2010 at 01:59:02PM -0400, Jean-Francois Levesque wrote:
>> What is the output of
>>
>> # sh sdm prefer
> 
> ME3400#sh sdm prefer
>  The current template is "layer-2" template.
>  The selected template optimizes the resources in
>  the switch to support this level of features for
>  8 routed interfaces and 1024 VLANs.
> 
>   number of unicast mac addresses:                  8K
>   number of IPv4 IGMP groups:                       1K
>   number of IPv4 multicast routes:                  0
>   number of IPv4 unicast routes:                    0
>   number of IPv4 policy based routing aces:         0
>   number of IPv4/MAC qos aces:                      0.5K
>   number of IPv4/MAC security aces:                 1K
> 
> ME3400#
> 
> Everton
>