[c-nsp] Strange ME3400 PPS Limit

[Everton da Silva Marques]

That's it! Thanks a lot!

Everton

On Wed, Apr 14, 2010 at 02:09:03PM -0400, Jean-Francois Levesque wrote:
> You are using "layer-2" template with no place in the TCAM for ip 
> routes. If you are using this switch as a L3 switch, take a look at the 
> "default" template.
> 
> For more info: 
> http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_52_se/configuration/guide/swsdm.html
> 
> JF
> 
> Everton da Silva Marques wrote:
> >On Wed, Apr 14, 2010 at 01:59:02PM -0400, Jean-Francois Levesque wrote:
> >>What is the output of
> >>
> >># sh sdm prefer
> >
> >ME3400#sh sdm prefer
> > The current template is "layer-2" template.
> > The selected template optimizes the resources in
> > the switch to support this level of features for
> > 8 routed interfaces and 1024 VLANs.
> >
> >  number of unicast mac addresses:                  8K
> >  number of IPv4 IGMP groups:                       1K
> >  number of IPv4 multicast routes:                  0
> >  number of IPv4 unicast routes:                    0
> >  number of IPv4 policy based routing aces:         0
> >  number of IPv4/MAC qos aces:                      0.5K
> >  number of IPv4/MAC security aces:                 1K
> >
> >ME3400#
> >
> >Everton
> >