[c-nsp] SCE 8000 with 2*SCM-E

[Ruslan Pustovoytov]

We test this release in production from 20 april.
I see that bypass do not work if I take out  any optics from SIP. It 
work only when I reload SCE or take out SIP from chassis.
But I have no big experience with SCE.


> Did anybody try this release in production?
>
> 2010/4/17 Yann Gauteron <ygauteron at gmail.com>
>
>   
>> 3.6 is out since Tuesday this week :-)
>>
>> 2010/3/18 Mikhail Schedrin <mschedrin at gmail.com>
>>
>> Sorry that I didn't answer so much time.
>>     
>>> As I got to know from cisco engineers 2 SCMs are supported only by
>>> software
>>> 3.6 that hasn't released yet.
>>> I did open TAC case, they don't know that 2 SCMs are not suported by
>>> 3.5.5.
>>> They also do not have 2 SCMs in a lab to test it :(
>>>
>>> On 3 March 2010 19:17, Ghattas Jacob <gatesman at gmail.com> wrote:
>>>
>>>       
>>>> Mikhail,
>>>> Be sure both sce have the same pkg installed before you insert the
>>>>         
>>> second
>>>       
>>>> one to the sce.
>>>> Which version are you running as it should be 3.6 and higher...
>>>>
>>>> Jacob
>>>>
>>>>
>>>> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner (avayner) <
>>>>         
>>> avayner at cisco.com>wrote:
>>>       
>>>>> Mikhail,
>>>>>
>>>>> I recommend you open a TAC case, as this could be a hardware problem,
>>>>> but it requires some debugging...
>>>>>
>>>>> Arie
>>>>>
>>>>> -----Original Message-----
>>>>> From: cisco-nsp-bounces at puck.nether.net
>>>>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mikhail
>>>>>           
>>> Schedrin
>>>       
>>>>> Sent: Wednesday, March 03, 2010 11:46
>>>>> To: cisco-nsp at puck.nether.net
>>>>> Subject: [c-nsp] SCE 8000 with 2*SCM-E
>>>>>
>>>>> Hi.
>>>>> Does anybody have the experince of using SCE8000 with two SCM-E
>>>>>           
>>> modules?
>>>       
>>>>> We
>>>>> got the second SCM-E couple of days ago and SCE always boots in
>>>>>           
>>> recovery
>>>       
>>>>> mode, when I install the second module.
>>>>> I could not find any documentation about installing and configuring the
>>>>> second SCM-E, I think it should work out of the box. Actually it does
>>>>> not.
>>>>> _______________________________________________
>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>
>>>>> _______________________________________________
>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>
>>>>>           
>>>>         
>>> --
>>> С уважением,
>>> Щедрин Михаил
>>> Начальник отдела ТП2
>>> SkyNet Telecom http://sknt.ru
>>> Санкт-Петербург
>>> тел. +7 812 600-75-35 ext. 554
>>> моб. +7 911 934-79-83
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>>>       
>>     
>
>
>