[c-nsp] SCE 8000 with 2*SCM-E

[Mikhail Schedrin]

Did anyone try 2 SCME-E modules in one cassis with new software?

On 22 April 2010 15:41, Ruslan Pustovoytov <rus-p at inbox.ru> wrote:

> We test this release in production from 20 april.
> I see that bypass do not work if I take out  any optics from SIP. It work
> only when I reload SCE or take out SIP from chassis.
> But I have no big experience with SCE.
>
>
>
>  Did anybody try this release in production?
>>
>> 2010/4/17 Yann Gauteron <ygauteron at gmail.com>
>>
>>
>>
>>> 3.6 is out since Tuesday this week :-)
>>>
>>> 2010/3/18 Mikhail Schedrin <mschedrin at gmail.com>
>>>
>>> Sorry that I didn't answer so much time.
>>>
>>>
>>>> As I got to know from cisco engineers 2 SCMs are supported only by
>>>> software
>>>> 3.6 that hasn't released yet.
>>>> I did open TAC case, they don't know that 2 SCMs are not suported by
>>>> 3.5.5.
>>>> They also do not have 2 SCMs in a lab to test it :(
>>>>
>>>> On 3 March 2010 19:17, Ghattas Jacob <gatesman at gmail.com> wrote:
>>>>
>>>>
>>>>
>>>>> Mikhail,
>>>>> Be sure both sce have the same pkg installed before you insert the
>>>>>
>>>>>
>>>> second
>>>>
>>>>
>>>>> one to the sce.
>>>>> Which version are you running as it should be 3.6 and higher...
>>>>>
>>>>> Jacob
>>>>>
>>>>>
>>>>> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner (avayner) <
>>>>>
>>>>>
>>>> avayner at cisco.com>wrote:
>>>>
>>>>
>>>>> Mikhail,
>>>>>>
>>>>>> I recommend you open a TAC case, as this could be a hardware problem,
>>>>>> but it requires some debugging...
>>>>>>
>>>>>> Arie
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: cisco-nsp-bounces at puck.nether.net
>>>>>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mikhail
>>>>>>
>>>>>>
>>>>> Schedrin
>>>>
>>>>
>>>>> Sent: Wednesday, March 03, 2010 11:46
>>>>>> To: cisco-nsp at puck.nether.net
>>>>>> Subject: [c-nsp] SCE 8000 with 2*SCM-E
>>>>>>
>>>>>> Hi.
>>>>>> Does anybody have the experince of using SCE8000 with two SCM-E
>>>>>>
>>>>>>
>>>>> modules?
>>>>
>>>>
>>>>> We
>>>>>> got the second SCM-E couple of days ago and SCE always boots in
>>>>>>
>>>>>>
>>>>> recovery
>>>>
>>>>
>>>>> mode, when I install the second module.
>>>>>> I could not find any documentation about installing and configuring
>>>>>> the
>>>>>> second SCM-E, I think it should work out of the box. Actually it does
>>>>>> not.
>>>>>> _______________________________________________
>>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>>
>>>>>> _______________________________________________
>>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>> --
>>>> С уважением,
>>>> Щедрин Михаил
>>>> Начальник отдела ТП2
>>>> SkyNet Telecom http://sknt.ru
>>>> Санкт-Петербург
>>>> тел. +7 812 600-75-35 ext. 554
>>>> моб. +7 911 934-79-83
>>>> _______________________________________________
>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
С уважением,
Щедрин Михаил
Начальник отдела ТП2
SkyNet Telecom http://sknt.ru
Санкт-Петербург
тел. +7 812 600-75-35 ext. 554
моб. +7 911 934-79-83