[c-nsp] SCE 8000 with 2*SCM-E

[Ruslan Pustovoytov]

Yes.
> Did anyone try 2 SCME-E modules in one cassis with new software? 
>
> On 22 April 2010 15:41, Ruslan Pustovoytov <rus-p at inbox.ru 
> <mailto:rus-p at inbox.ru>> wrote:
>
>     We test this release in production from 20 april.
>     I see that bypass do not work if I take out  any optics from SIP.
>     It work only when I reload SCE or take out SIP from chassis.
>     But I have no big experience with SCE.
>
>
>
>         Did anybody try this release in production?
>
>         2010/4/17 Yann Gauteron <ygauteron at gmail.com
>         <mailto:ygauteron at gmail.com>>
>
>          
>
>             3.6 is out since Tuesday this week :-)
>
>             2010/3/18 Mikhail Schedrin <mschedrin at gmail.com
>             <mailto:mschedrin at gmail.com>>
>
>             Sorry that I didn't answer so much time.
>                
>
>                 As I got to know from cisco engineers 2 SCMs are
>                 supported only by
>                 software
>                 3.6 that hasn't released yet.
>                 I did open TAC case, they don't know that 2 SCMs are
>                 not suported by
>                 3.5.5.
>                 They also do not have 2 SCMs in a lab to test it :(
>
>                 On 3 March 2010 19:17, Ghattas Jacob
>                 <gatesman at gmail.com <mailto:gatesman at gmail.com>> wrote:
>
>                      
>
>                     Mikhail,
>                     Be sure both sce have the same pkg installed
>                     before you insert the
>                            
>
>                 second
>                      
>
>                     one to the sce.
>                     Which version are you running as it should be 3.6
>                     and higher...
>
>                     Jacob
>
>
>                     On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner
>                     (avayner) <
>                            
>
>                 avayner at cisco.com <mailto:avayner at cisco.com>>wrote:
>                      
>
>                         Mikhail,
>
>                         I recommend you open a TAC case, as this could
>                         be a hardware problem,
>                         but it requires some debugging...
>
>                         Arie
>
>                         -----Original Message-----
>                         From: cisco-nsp-bounces at puck.nether.net
>                         <mailto:cisco-nsp-bounces at puck.nether.net>
>                         [mailto:cisco-nsp-bounces at puck.nether.net
>                         <mailto:cisco-nsp-bounces at puck.nether.net>] On
>                         Behalf Of Mikhail
>                                  
>
>                 Schedrin
>                      
>
>                         Sent: Wednesday, March 03, 2010 11:46
>                         To: cisco-nsp at puck.nether.net
>                         <mailto:cisco-nsp at puck.nether.net>
>                         Subject: [c-nsp] SCE 8000 with 2*SCM-E
>
>                         Hi.
>                         Does anybody have the experince of using
>                         SCE8000 with two SCM-E
>                                  
>
>                 modules?
>                      
>
>                         We
>                         got the second SCM-E couple of days ago and
>                         SCE always boots in
>                                  
>
>                 recovery
>                      
>
>                         mode, when I install the second module.
>                         I could not find any documentation about
>                         installing and configuring the
>                         second SCM-E, I think it should work out of
>                         the box. Actually it does
>                         not.
>                         _______________________________________________
>                         cisco-nsp mailing list
>                          cisco-nsp at puck.nether.net
>                         <mailto:cisco-nsp at puck.nether.net>
>                         https://puck.nether.net/mailman/listinfo/cisco-nsp
>                         archive at
>                         http://puck.nether.net/pipermail/cisco-nsp/
>
>                         _______________________________________________
>                         cisco-nsp mailing list
>                          cisco-nsp at puck.nether.net
>                         <mailto:cisco-nsp at puck.nether.net>
>                         https://puck.nether.net/mailman/listinfo/cisco-nsp
>                         archive at
>                         http://puck.nether.net/pipermail/cisco-nsp/
>
>                                  
>
>                            
>
>                 --
>                 С уважением,
>                 Щедрин Михаил
>                 Начальник отдела ТП2
>                 SkyNet Telecom http://sknt.ru
>                 Санкт-Петербург
>                 тел. +7 812 600-75-35 ext. 554
>                 моб. +7 911 934-79-83
>                 _______________________________________________
>                 cisco-nsp mailing list  cisco-nsp at puck.nether.net
>                 <mailto:cisco-nsp at puck.nether.net>
>                 https://puck.nether.net/mailman/listinfo/cisco-nsp
>                 archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>                      
>
>                
>
>
>
>          
>
>
>     _______________________________________________
>     cisco-nsp mailing list  cisco-nsp at puck.nether.net
>     <mailto:cisco-nsp at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-nsp
>     archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
> -- 
> С уважением,
> Щедрин Михаил
> Начальник отдела ТП2
> SkyNet Telecom http://sknt.ru
> Санкт-Петербург
> тел. +7 812 600-75-35 ext. 554
> моб. +7 911 934-79-83