[c-nsp] SCE 8000 with 2*SCM-E

[Mikhail Schedrin]

Did it work on SCOS 3.5.5 or only in 3.6?

On 22 April 2010 17:16, Ruslan Pustovoytov <rus-p at inbox.ru> wrote:

> Yes.
>
>> Did anyone try 2 SCME-E modules in one cassis with new software?
>> On 22 April 2010 15:41, Ruslan Pustovoytov <rus-p at inbox.ru <mailto:
>> rus-p at inbox.ru>> wrote:
>>
>>    We test this release in production from 20 april.
>>    I see that bypass do not work if I take out  any optics from SIP.
>>    It work only when I reload SCE or take out SIP from chassis.
>>    But I have no big experience with SCE.
>>
>>
>>
>>        Did anybody try this release in production?
>>
>>        2010/4/17 Yann Gauteron <ygauteron at gmail.com
>>        <mailto:ygauteron at gmail.com>>
>>
>>
>>
>>            3.6 is out since Tuesday this week :-)
>>
>>            2010/3/18 Mikhail Schedrin <mschedrin at gmail.com
>>            <mailto:mschedrin at gmail.com>>
>>
>>
>>            Sorry that I didn't answer so much time.
>>
>>                As I got to know from cisco engineers 2 SCMs are
>>                supported only by
>>                software
>>                3.6 that hasn't released yet.
>>                I did open TAC case, they don't know that 2 SCMs are
>>                not suported by
>>                3.5.5.
>>                They also do not have 2 SCMs in a lab to test it :(
>>
>>                On 3 March 2010 19:17, Ghattas Jacob
>>                <gatesman at gmail.com <mailto:gatesman at gmail.com>> wrote:
>>
>>
>>                    Mikhail,
>>                    Be sure both sce have the same pkg installed
>>                    before you insert the
>>
>>                second
>>
>>                    one to the sce.
>>                    Which version are you running as it should be 3.6
>>                    and higher...
>>
>>                    Jacob
>>
>>
>>                    On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner
>>                    (avayner) <
>>
>>                avayner at cisco.com <mailto:avayner at cisco.com>>wrote:
>>
>>
>>                        Mikhail,
>>
>>                        I recommend you open a TAC case, as this could
>>                        be a hardware problem,
>>                        but it requires some debugging...
>>
>>                        Arie
>>
>>                        -----Original Message-----
>>                        From: cisco-nsp-bounces at puck.nether.net
>>                        <mailto:cisco-nsp-bounces at puck.nether.net>
>>                        [mailto:cisco-nsp-bounces at puck.nether.net
>>                        <mailto:cisco-nsp-bounces at puck.nether.net>] On
>>                        Behalf Of Mikhail
>>
>>                Schedrin
>>
>>                        Sent: Wednesday, March 03, 2010 11:46
>>                        To: cisco-nsp at puck.nether.net
>>                        <mailto:cisco-nsp at puck.nether.net>
>>
>>                        Subject: [c-nsp] SCE 8000 with 2*SCM-E
>>
>>                        Hi.
>>                        Does anybody have the experince of using
>>                        SCE8000 with two SCM-E
>>
>>                modules?
>>
>>                        We
>>                        got the second SCM-E couple of days ago and
>>                        SCE always boots in
>>
>>                recovery
>>
>>                        mode, when I install the second module.
>>                        I could not find any documentation about
>>                        installing and configuring the
>>                        second SCM-E, I think it should work out of
>>                        the box. Actually it does
>>                        not.
>>                        _______________________________________________
>>                        cisco-nsp mailing list
>>                         cisco-nsp at puck.nether.net
>>                        <mailto:cisco-nsp at puck.nether.net>
>>
>>                        https://puck.nether.net/mailman/listinfo/cisco-nsp
>>                        archive at
>>                        http://puck.nether.net/pipermail/cisco-nsp/
>>
>>                        _______________________________________________
>>                        cisco-nsp mailing list
>>                         cisco-nsp at puck.nether.net
>>                        <mailto:cisco-nsp at puck.nether.net>
>>
>>                        https://puck.nether.net/mailman/listinfo/cisco-nsp
>>                        archive at
>>                        http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>                --
>>                С уважением,
>>                Щедрин Михаил
>>                Начальник отдела ТП2
>>                SkyNet Telecom http://sknt.ru
>>                Санкт-Петербург
>>                тел. +7 812 600-75-35 ext. 554
>>                моб. +7 911 934-79-83
>>                _______________________________________________
>>                cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>                <mailto:cisco-nsp at puck.nether.net>
>>
>>                https://puck.nether.net/mailman/listinfo/cisco-nsp
>>                archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>>
>>
>>
>>    _______________________________________________
>>    cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>    <mailto:cisco-nsp at puck.nether.net>
>>
>>    https://puck.nether.net/mailman/listinfo/cisco-nsp
>>    archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>> --
>> С уважением,
>> Щедрин Михаил
>> Начальник отдела ТП2
>> SkyNet Telecom http://sknt.ru
>> Санкт-Петербург
>> тел. +7 812 600-75-35 ext. 554
>> моб. +7 911 934-79-83
>>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
С уважением,
Щедрин Михаил