[c-nsp] SCE 8000 with 2*SCM-E
Ruslan Pustovoytov
rus-p at inbox.ru
Fri Apr 23 02:14:55 EDT 2010
Mikhail, I have no 3.5.5 soft.
Our cisco partner give me release notes for 3.6.0 where cisco announce
30gig performance and 16M flows for 2 SCME
So, I do not see any reason to stay on 3.5.5
> Did it work on SCOS 3.5.5 or only in 3.6?
>
> On 22 April 2010 17:16, Ruslan Pustovoytov <rus-p at inbox.ru
> <mailto:rus-p at inbox.ru>> wrote:
>
> Yes.
>
> Did anyone try 2 SCME-E modules in one cassis with new software?
> On 22 April 2010 15:41, Ruslan Pustovoytov <rus-p at inbox.ru
> <mailto:rus-p at inbox.ru> <mailto:rus-p at inbox.ru
> <mailto:rus-p at inbox.ru>>> wrote:
>
> We test this release in production from 20 april.
> I see that bypass do not work if I take out any optics
> from SIP.
> It work only when I reload SCE or take out SIP from chassis.
> But I have no big experience with SCE.
>
>
>
> Did anybody try this release in production?
>
> 2010/4/17 Yann Gauteron <ygauteron at gmail.com
> <mailto:ygauteron at gmail.com>
> <mailto:ygauteron at gmail.com <mailto:ygauteron at gmail.com>>>
>
>
>
> 3.6 is out since Tuesday this week :-)
>
> 2010/3/18 Mikhail Schedrin <mschedrin at gmail.com
> <mailto:mschedrin at gmail.com>
> <mailto:mschedrin at gmail.com
> <mailto:mschedrin at gmail.com>>>
>
>
> Sorry that I didn't answer so much time.
>
> As I got to know from cisco engineers 2 SCMs are
> supported only by
> software
> 3.6 that hasn't released yet.
> I did open TAC case, they don't know that 2
> SCMs are
> not suported by
> 3.5.5.
> They also do not have 2 SCMs in a lab to test it :(
>
> On 3 March 2010 19:17, Ghattas Jacob
> <gatesman at gmail.com <mailto:gatesman at gmail.com>
> <mailto:gatesman at gmail.com <mailto:gatesman at gmail.com>>> wrote:
>
>
> Mikhail,
> Be sure both sce have the same pkg installed
> before you insert the
>
> second
>
> one to the sce.
> Which version are you running as it should
> be 3.6
> and higher...
>
> Jacob
>
>
> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner
> (avayner) <
>
> avayner at cisco.com <mailto:avayner at cisco.com>
> <mailto:avayner at cisco.com <mailto:avayner at cisco.com>>>wrote:
>
>
> Mikhail,
>
> I recommend you open a TAC case, as
> this could
> be a hardware problem,
> but it requires some debugging...
>
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> <mailto:cisco-nsp-bounces at puck.nether.net>
>
> <mailto:cisco-nsp-bounces at puck.nether.net
> <mailto:cisco-nsp-bounces at puck.nether.net>>
>
> [mailto:cisco-nsp-bounces at puck.nether.net
> <mailto:cisco-nsp-bounces at puck.nether.net>
>
> <mailto:cisco-nsp-bounces at puck.nether.net
> <mailto:cisco-nsp-bounces at puck.nether.net>>] On
> Behalf Of Mikhail
>
> Schedrin
>
> Sent: Wednesday, March 03, 2010 11:46
> To: cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>
> <mailto:cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>>
>
> Subject: [c-nsp] SCE 8000 with 2*SCM-E
>
> Hi.
> Does anybody have the experince of using
> SCE8000 with two SCM-E
>
> modules?
>
> We
> got the second SCM-E couple of days ago and
> SCE always boots in
>
> recovery
>
> mode, when I install the second module.
> I could not find any documentation about
> installing and configuring the
> second SCM-E, I think it should work out of
> the box. Actually it does
> not.
>
> _______________________________________________
> cisco-nsp mailing list
> cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>
> <mailto:cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>>
>
>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>
>
> _______________________________________________
> cisco-nsp mailing list
> cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>
> <mailto:cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>>
>
>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
> --
> С уважением,
> Щедрин Михаил
> Начальник отдела ТП2
> SkyNet Telecom http://sknt.ru
> Санкт-Петербург
> тел. +7 812 600-75-35 ext. 554
> моб. +7 911 934-79-83
> _______________________________________________
> cisco-nsp mailing list
> cisco-nsp at puck.nether.net <mailto:cisco-nsp at puck.nether.net>
> <mailto:cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>>
>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>
> <mailto:cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>>
>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
> --
> С уважением,
> Щедрин Михаил
> Начальник отдела ТП2
> SkyNet Telecom http://sknt.ru
> Санкт-Петербург
> тел. +7 812 600-75-35 ext. 554
> моб. +7 911 934-79-83
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> <mailto:cisco-nsp at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
> --
> С уважением,
> Щедрин Михаил
>
More information about the cisco-nsp
mailing list