[c-nsp] SCE 8000 with 2*SCM-E
Mikhail Schedrin
mschedrin at gmail.com
Fri Apr 30 05:12:21 EDT 2010
I cannot find protocol pack for 3.6. It is required to upgrade from 3.5.5 as
Iunderstood. Does anyone have the solutiopn for this problem?
2010/4/23 Ruslan Pustovoytov <rus-p at inbox.ru>
> Mikhail, I have no 3.5.5 soft.
> Our cisco partner give me release notes for 3.6.0 where cisco announce
> 30gig performance and 16M flows for 2 SCME
> So, I do not see any reason to stay on 3.5.5
>
>
> Did it work on SCOS 3.5.5 or only in 3.6?
>>
>> On 22 April 2010 17:16, Ruslan Pustovoytov <rus-p at inbox.ru <mailto:
>> rus-p at inbox.ru>> wrote:
>>
>> Yes.
>>
>> Did anyone try 2 SCME-E modules in one cassis with new software?
>> On 22 April 2010 15:41, Ruslan Pustovoytov <rus-p at inbox.ru
>> <mailto:rus-p at inbox.ru> <mailto:rus-p at inbox.ru
>>
>> <mailto:rus-p at inbox.ru>>> wrote:
>>
>> We test this release in production from 20 april.
>> I see that bypass do not work if I take out any optics
>> from SIP.
>> It work only when I reload SCE or take out SIP from chassis.
>> But I have no big experience with SCE.
>>
>>
>>
>> Did anybody try this release in production?
>>
>> 2010/4/17 Yann Gauteron <ygauteron at gmail.com
>> <mailto:ygauteron at gmail.com>
>> <mailto:ygauteron at gmail.com <mailto:ygauteron at gmail.com>>>
>>
>>
>>
>> 3.6 is out since Tuesday this week :-)
>>
>> 2010/3/18 Mikhail Schedrin <mschedrin at gmail.com
>> <mailto:mschedrin at gmail.com>
>> <mailto:mschedrin at gmail.com
>>
>> <mailto:mschedrin at gmail.com>>>
>>
>>
>> Sorry that I didn't answer so much time.
>> As I got to know from cisco
>> engineers 2 SCMs are
>> supported only by
>> software
>> 3.6 that hasn't released yet.
>> I did open TAC case, they don't know that 2
>> SCMs are
>> not suported by
>> 3.5.5.
>> They also do not have 2 SCMs in a lab to test it :(
>>
>> On 3 March 2010 19:17, Ghattas Jacob
>> <gatesman at gmail.com <mailto:gatesman at gmail.com>
>> <mailto:gatesman at gmail.com <mailto:gatesman at gmail.com>>> wrote:
>>
>> Mikhail,
>> Be sure both sce have the same pkg installed
>> before you insert the
>> second
>> one to the sce.
>> Which version are you running as it should
>> be 3.6
>> and higher...
>>
>> Jacob
>>
>>
>> On Wed, Mar 3, 2010 at 5:17 PM, Arie Vayner
>> (avayner) <
>> avayner at cisco.com<mailto:
>> avayner at cisco.com>
>> <mailto:avayner at cisco.com <mailto:avayner at cisco.com>>>wrote:
>>
>>
>> Mikhail,
>>
>> I recommend you open a TAC case, as
>> this could
>> be a hardware problem,
>> but it requires some debugging...
>>
>> Arie
>>
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net
>> <mailto:cisco-nsp-bounces at puck.nether.net>
>> <mailto:
>> cisco-nsp-bounces at puck.nether.net
>> <mailto:cisco-nsp-bounces at puck.nether.net>>
>> [mailto:
>> cisco-nsp-bounces at puck.nether.net
>> <mailto:cisco-nsp-bounces at puck.nether.net>
>> <mailto:
>> cisco-nsp-bounces at puck.nether.net
>> <mailto:cisco-nsp-bounces at puck.nether.net>>] On
>> Behalf Of Mikhail
>> Schedrin
>> Sent: Wednesday,
>> March 03, 2010 11:46
>> To: cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>
>> <mailto:cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>>
>>
>> Subject: [c-nsp] SCE 8000 with 2*SCM-E
>>
>> Hi.
>> Does anybody have the experince of using
>> SCE8000 with two SCM-E
>> modules?
>> We
>> got the second SCM-E couple of days ago and
>> SCE always boots in
>> recovery
>> mode, when I
>> install the second module.
>> I could not find any documentation about
>> installing and configuring the
>> second SCM-E, I think it should work out of
>> the box. Actually it does
>> not.
>>
>> _______________________________________________
>> cisco-nsp mailing list
>> cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>
>> <mailto:cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>>
>>
>>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at
>> http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list
>> cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>
>> <mailto:cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>>
>>
>>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at
>> http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>> --
>> С уважением,
>> Щедрин Михаил
>> Начальник отдела ТП2
>> SkyNet Telecom http://sknt.ru
>> Санкт-Петербург
>> тел. +7 812 600-75-35 ext. 554
>> моб. +7 911 934-79-83
>> _______________________________________________
>> cisco-nsp mailing list
>> cisco-nsp at puck.nether.net <mailto:cisco-nsp at puck.nether.net>
>> <mailto:cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>>
>>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at
>> http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>
>> <mailto:cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>>
>>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>> -- С уважением,
>> Щедрин Михаил
>> Начальник отдела ТП2
>> SkyNet Telecom http://sknt.ru
>> Санкт-Петербург
>> тел. +7 812 600-75-35 ext. 554
>> моб. +7 911 934-79-83
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> <mailto:cisco-nsp at puck.nether.net>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>> --
>> С уважением,
>> Щедрин Михаил
>>
>>
>
--
С уважением,
Щедрин Михаил
More information about the cisco-nsp
mailing list