[c-nsp] copying ios image to a cisco 2950 switch with no ios image

[teklay gebremichael]

it worked for me!!!
thank you

--- On Sat, 4/24/10, James Baker <james at jgbaker.co.nz> wrote:

From: James Baker <james at jgbaker.co.nz>
Subject: RE: [c-nsp] copying ios image to a cisco 2950 switch with no ios image
To: "teklay gebremichael" <teklish76 at yahoo.com>, "cisco forum" <cisco-nsp at puck.nether.net>
Date: Saturday, April 24, 2010, 12:31 AM

Try this:


http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml




-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of teklay gebremichael
Sent: Saturday, 24 April 2010 7:17 p.m.
To: cisco forum
Subject: [c-nsp] copying ios image to a cisco 2950 switch with no ios image

hello
i have one cisco 2950 switch with no ios image.  the defaul prompt it enters is
switch:
and it has the following bootloader
switch: ver
C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1) Compiled Mon 22-Jul-02 17:18 by antonino i can see the boot and copy commands, but i am unable to load valid ios to flash. the list of file systems are as follows.
switch: dir

List of filesystems currently registered:

               flash[0]: (read-write)
              xmodem[1]: (read-only)
                null[2]: (read-write)
                  bs[3]: (read-only)                                            
                                                                                
switch: 

can any body help how to load ios image to the switch?
thank you in advance.
Teklay




      
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/