[c-nsp] Match-in-VRF

[David Warner]

Hi, 
Was hoping someone could advise with regards to what the NAT keywords 
"match-in-vrf" achieves? We typically use this in production. However, Ive just 
been labbing NAT config using VRF lite and it doesnt appear to change behaviour 
and Cisco literature is unclear. With or without it, translations occur in the 
relevant VRF.

ie 
ip nat inside source static 1.1.1.1 2.2.2.2 vrf VRF-TEST extendable 
<match-in-vrf>

Thanks.