[c-nsp] Match-in-VRF

[Arie Vayner (avayner)]

David,

Take a look here:
http://docwiki.cisco.com/wiki/Category:NAT
http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_nat.htm
l

(search for match-in-vrf)

Hope this helps.

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of David Warner
Sent: Tuesday, August 03, 2010 09:54
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Match-in-VRF

Hi, 
Was hoping someone could advise with regards to what the NAT keywords 
"match-in-vrf" achieves? We typically use this in production. However,
Ive just 
been labbing NAT config using VRF lite and it doesnt appear to change
behaviour 
and Cisco literature is unclear. With or without it, translations occur
in the 
relevant VRF.

ie 
ip nat inside source static 1.1.1.1 2.2.2.2 vrf VRF-TEST extendable 
<match-in-vrf>

Thanks.



      
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/