[c-nsp] Cleanest way to remove a redundant SUP720-3BXL

[Peter Kranz]

I need to remove a STANDBY HOT redundant SUP720-3BXL from a 6506-E chassis
tonight and want to minimize any possibility of a reload or traffic
interruption. Other than just yanking the card from the chassis and relying
on OIR, is there any suggested steps to take to make this cleaner?

 

I want to pull the card from slot 6, we need it in another chassis..

 

Rtr-JLS-Backup#show redundancy

Redundant System Information :

------------------------------

       Available system uptime = 3 weeks, 12 hours, 26 minutes

Switchovers system experienced = 0

              Standby failures = 0

        Last switchover reason = none

 

                 Hardware Mode = Duplex

    Configured Redundancy Mode = sso

     Operating Redundancy Mode = sso

              Maintenance Mode = Disabled

                Communications = Up

 

Current Processor Information :

-------------------------------

               Active Location = slot 5

        Current Software state = ACTIVE

       Uptime in current state = 3 weeks, 12 hours, 25 minutes

                 Image Version = Cisco IOS Software, s72033_rp Software
(s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE
(fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Tue 27-Oct-09 11:11 by prod_rel_team

                          BOOT =
disk1:s72033-advipservicesk9_wan-mz.122-33.SXI3.bin,12;

                   CONFIG_FILE = 

                       BOOTLDR = 

        Configuration register = 0x2102

 

Peer Processor Information :

----------------------------

              Standby Location = slot 6

        Current Software state = STANDBY HOT 

       Uptime in current state = 3 weeks, 12 hours, 10 minutes

                 Image Version = Cisco IOS Software, s72033_rp Software
(s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXI3, RELEASE SOFTWARE
(fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2009 by Cisco Systems, Inc.

Compiled Tue 27-Oct-09 11:11 by prod_rel_team

                          BOOT =
disk1:s72033-advipservicesk9_wan-mz.122-33.SXI3.bin,12;

                   CONFIG_FILE = 

                       BOOTLDR = 

        Configuration register = 0x2102

 

Peter Kranz
Founder/CEO - Unwired Ltd
 <http://www.unwiredltd.com/> www.UnwiredLtd.com
Desk: 510-868-1614 x100
Mobile: 510-207-0000
 <mailto:pkranz at unwiredltd.com> pkranz at unwiredltd.com