[c-nsp] CAT6509 module position in chassis

[Nick Hilliard]

On 11/08/2010 15:03, Pavel Dimow wrote:
> is there any recommended/best practices for module placement in
> CAT6509 chassis?  For example, FWSM in slot 3, ACE in slot 2 etc etc..

No.  Other than that the sup720 needs to be plugged into slot 5 or 6, there 
are no other limitations.

> http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a0080159856_ps2797_Products_Data_Sheet.html#wp9000238table4000005

(see "Slot requirements").

Nick