[c-nsp] Cisco IPv6 doubt

[TJ]

If a router has no IPv4 addresses to 'borrow' and use as a convenient 32bit
value, you must manually configure the RID.

/TJ


On Thu, Aug 12, 2010 at 10:50, Jeferson Guardia <jefersonf at gmail.com> wrote:

>  Hi Group,
>
> A doubt/curiosity, what happens in a router that you are setting up IGP's ,
> and you dont hardcode the router-id, thus
> it will look for an IPv4 address to use as a router-id, but what if I dont
> have any IPv4 address configured? Where will
> it come from?
>
> Rgs,
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>