[c-nsp] full duplex mismatch speed - dynamips

[Jeferson Guardia]

 Guys,

Anyone knows how to solve this on dynamips? (router with lan switch
connection) - I thought that setting
speed auto would solve it.

R3#
*Mar  1 00:12:08.323: %SYS-5-CONFIG_I: Configured from console by console
*Mar  1 00:12:10.027: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed
state t
o up
*Mar  1 00:12:11.027: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthern
et0/0, changed state to up
*Mar  1 00:12:23.527: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
Fast
Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
*Mar  1 00:12:24.079: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
Fast
Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
*Mar  1 00:12:26.295: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
Fast
Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
*Mar  1 00:13:10.571: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
Fast
Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).
R3#
R3#
*Mar  1 00:13:59.455: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
Fast
Ethernet0/0 (not full duplex), with Router FastEthernet1/3 (full duplex).


Rgs,