[c-nsp] Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

[Bayasgalan Bayantur]

Hello

can anybody plz advice me what is the problem with my 2960G switch


switch:  reset
Are you sure you want to reset the system (y/n)?y
System resetting...

Base ethernet MAC Address: 00:22:91:a1:be:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 604 files, 19 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 8339968
flashfs[0]: Bytes available: 24174080
flashfs[0]: flashfs fsck took 10 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading
"flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

File "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin"
uncompressed and installed, entry point: 0x3000
executing...

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5,
RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 20:06 by nachen
Image text-base: 0x00003000, data-base: 0x00D40000

Initializing flashfs...

flashfs[1]: 604 files, 19 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 8339968
flashfs[1]: Bytes available: 24174080
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.

POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed

POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed

POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed

POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed

POST: PortASIC CAM Subsystem Tests : Begin
TCAM (asic:3, bit: 5) address bus test failed
  Write: 5A_55555555_55555555-55_55555555_55555555
  Read:  5A_55555555_55555555-51_55555555_55555555
HTD POST: Address Bus Test Failed
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed

POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP

driver class subsystem initialization failed

cisco WS-C2960G-24TC-L (PowerPC405) processor (revision E0) with
61440K/4088K bytes of memory.
Processor board ID FOC1229V3PQ
Last reset from power-on
The password-recovery mechanism is enabled.

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : 00:22:91:A1:BE:80
Motherboard assembly number     : 73-10015-06
Power supply part number        : 341-0098-02
Motherboard serial number       : FOC12292LAY
Power supply serial number      : DCA1227943W
Model revision number           : E0
Motherboard revision number     : A0
Model number                    : WS-C2960G-24TC-L
System serial number            : FOC1229V3PQ
Top Assembly Part Number        : 800-26673-03
Top Assembly Revision Number    : B0
Version ID                      : V03
CLEI Code Number                : COM3G00BRB
Hardware Board Revision Number  : 0x01


!!! WARNING: The switch is not usable !!!
Unable to create l2trace server process, socket_open() failed


Press RETURN to get started!


00:00:33: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type
vlanCannot Get the number of ports in MAC notification

00:00:33: hl2mcm_core_process: hl2mcm_install_hl2mcm_ctrl_entries() failed.

00:00:33: %SYS-3-HARIKARI: Process HL2MCM top-level routine exited
00:00:33: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation
error: call = ifs_read_until (header) / file =  / code = 21 (Is a directory)
/ bytes transfered = -1
-Traceback= 1695B4 165664 BDD138 BD470C
00:00:34: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5,
RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 20:06 by nachen
00:00:34: Unable to open UDP socket on CMP_PORT

>From what is it getting in mistake?

what deffect is it in it?

Please help me!!!

what's the reason of this kind of defect?

Regards



B.Bayasgalan