[c-nsp] Cisco 2960 Switch !!! WARNING: The switch is not usable !!!

Sun Aug 22 21:40:18 EDT 2010

TCAM Memory would appear to be corrupt from the POST. Time for an RMA.

--
http://dcp.dcptech.com

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Bayasgalan Bayantur
> Sent: Sunday, August 22, 2010 8:56 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco 2960 Switch !!! WARNING: The switch is not
> usable !!!
> 
> Hello
> 
> can anybody plz advice me what is the problem with my 2960G switch
> 
> 
> switch:  reset
> Are you sure you want to reset the system (y/n)?y
> System resetting...
> 
> Base ethernet MAC Address: 00:22:91:a1:be:80
> Xmodem file system is available.
> The password-recovery mechanism is enabled.
> Initializing Flash...
> flashfs[0]: 604 files, 19 directories
> flashfs[0]: 0 orphaned files, 0 orphaned directories
> flashfs[0]: Total bytes: 32514048
> flashfs[0]: Bytes used: 8339968
> flashfs[0]: Bytes available: 24174080
> flashfs[0]: flashfs fsck took 10 seconds.
> ...done Initializing Flash.
> Boot Sector Filesystem (bs) installed, fsid: 3
> done.
> Loading
> "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-
> 35.SE5.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
> 
> File "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-
> 35.SE5.bin"
> uncompressed and installed, entry point: 0x3000
> executing...
> 
>               Restricted Rights Legend
> 
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and Computer
> Software clause at DFARS sec. 252.227-7013.
> 
>            cisco Systems, Inc.
>            170 West Tasman Drive
>            San Jose, California 95134-1706
> 
> 
> 
> Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version
> 12.2(35)SE5,
> RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-2007 by Cisco Systems, Inc.
> Compiled Thu 19-Jul-07 20:06 by nachen
> Image text-base: 0x00003000, data-base: 0x00D40000
> 
> Initializing flashfs...
> 
> flashfs[1]: 604 files, 19 directories
> flashfs[1]: 0 orphaned files, 0 orphaned directories
> flashfs[1]: Total bytes: 32514048
> flashfs[1]: Bytes used: 8339968
> flashfs[1]: Bytes available: 24174080
> flashfs[1]: flashfs fsck took 1 seconds.
> flashfs[1]: Initialization complete....done Initializing flashfs.
> 
> POST: CPU MIC register Tests : Begin
> POST: CPU MIC register Tests : End, Status Passed
> 
> POST: PortASIC Memory Tests : Begin
> POST: PortASIC Memory Tests : End, Status Passed
> 
> POST: CPU MIC interface Loopback Tests : Begin
> POST: CPU MIC interface Loopback Tests : End, Status Passed
> 
> POST: PortASIC RingLoopback Tests : Begin
> POST: PortASIC RingLoopback Tests : End, Status Passed
> 
> POST: PortASIC CAM Subsystem Tests : Begin
> TCAM (asic:3, bit: 5) address bus test failed
>   Write: 5A_55555555_55555555-55_55555555_55555555
>   Read:  5A_55555555_55555555-51_55555555_55555555
> HTD POST: Address Bus Test Failed
> POST: POST Failed
> POST: PortASIC CAM Subsystem Tests : End, Status Failed
> 
> POST: CAM test failed
> POST Failed: disabling stack links and shutting down SDP
> 
> driver class subsystem initialization failed
> 
> cisco WS-C2960G-24TC-L (PowerPC405) processor (revision E0) with
> 61440K/4088K bytes of memory.
> Processor board ID FOC1229V3PQ
> Last reset from power-on
> The password-recovery mechanism is enabled.
> 
> 64K bytes of flash-simulated non-volatile configuration memory.
> Base ethernet MAC Address       : 00:22:91:A1:BE:80
> Motherboard assembly number     : 73-10015-06
> Power supply part number        : 341-0098-02
> Motherboard serial number       : FOC12292LAY
> Power supply serial number      : DCA1227943W
> Model revision number           : E0
> Motherboard revision number     : A0
> Model number                    : WS-C2960G-24TC-L
> System serial number            : FOC1229V3PQ
> Top Assembly Part Number        : 800-26673-03
> Top Assembly Revision Number    : B0
> Version ID                      : V03
> CLEI Code Number                : COM3G00BRB
> Hardware Board Revision Number  : 0x01
> 
> 
> !!! WARNING: The switch is not usable !!!
> Unable to create l2trace server process, socket_open() failed
> 
> 
> Press RETURN to get started!
> 
> 
> 00:00:33: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type
> vlanCannot Get the number of ports in MAC notification
> 
> 00:00:33: hl2mcm_core_process: hl2mcm_install_hl2mcm_ctrl_entries()
> failed.
> 
> 00:00:33: %SYS-3-HARIKARI: Process HL2MCM top-level routine exited
> 00:00:33: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file
> operation
> error: call = ifs_read_until (header) / file =  / code = 21 (Is a
> directory)
> / bytes transfered = -1
> -Traceback= 1695B4 165664 BDD138 BD470C
> 00:00:34: %SYS-5-RESTART: System restarted --
> Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version
> 12.2(35)SE5,
> RELEASE SOFTWARE (fc1)
> Copyright (c) 1986-2007 by Cisco Systems, Inc.
> Compiled Thu 19-Jul-07 20:06 by nachen
> 00:00:34: Unable to open UDP socket on CMP_PORT
> 
> >From what is it getting in mistake?
> 
> what deffect is it in it?
> 
> Please help me!!!
> 
> what's the reason of this kind of defect?
> 
> Regards
> 
> 
> 
> B.Bayasgalan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/