[c-nsp] VWIC2-1MFT-G703

[cisconsp at SecureObscure.com]

Unframed E1 support. Some telcos in EMEA sometimes do that and refuse to
change so we had to start shipping the VWIC2-2MFT-G703 instead of the
regular VWIC2-2MFT-T1/E1 that we would use in the americas.

John


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Andrew Gabriel
Sent: Tuesday, August 24, 2010 8:40 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] VWIC2-1MFT-G703

Hi,

We are deploying a bunch of E1s across Asia and EMEA, and were told by
our provider that for the sites that are G.703 they would recommend
the VWIC2-1MFT-G703 card rather than the regular channelized E1 cards.

Most of the E1 links G.703 connectivity I have seen typically work
fine with the VWIC2-2MFT-T1/E1 type card.

So would the VWIC2-2MFT-T1/E1 work for any E1 link, or do we really
need to buy the VWIC2-1MFT-G703 card that is more expensive and
difficult to source?

Thanks,
-Andrew.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/