[c-nsp] IOS on 4503

[Richard Mikisa]

Hi all,

I am looking for advice on the best IOS to run on my Catalyst 4503. I
am going to use it as a PE on a still small MPLS network.

cisco WS-C4503 (MPC8245) processor (revision 4) with 524288K bytes of memory.
Processor board ID FOX112813TS
MPC8245 CPU at 400Mhz, Supervisor V
Last reset from Reload
62 Virtual Ethernet/IEEE 802.3  interface(s)
98 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.

-- 
cheers
Richard