[c-nsp] XMODEM transfer over telnet/ssh, any chance?

Peter Rathlev peter at rathlev.dk
Wed Dec 15 06:23:21 EST 2010


On Wed, 2010-12-15 at 11:42 +0100, Peter Rathlev wrote:
> On Wed, 2010-12-15 at 10:25 +0000, Tomas Daniska wrote:
> > Or just for fun, you can use two routers and create an aux-to-aux
> > tunnel over ssh/telnet, so you can use the serial port on your PC as
> > if the device was local to you ;-)
> 
> I'll try that, it doesn't sound at all impossible that it will work. :-)

Meh, couldn't get that to work either. I still get NAKs on the XMODEM
transfer from within minicom, which uses lszrz. I also tried starting a
completely seperate process with "sx file.bin < /dev/ttyUSB0
> /dev/ttyUSB0" but still no luck.

I followed this guide to configure the AUX tunnel:

"How to Tunnel Async Data"
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_configuration_example09186a0080160c4d.shtml

-- 
Peter





More information about the cisco-nsp mailing list