[c-nsp] ATM Subinterface QoS

[Dave Weis]

Thank you all for the help, it seems to be working based on the output from show queueing and show policy-map. We'll do some stress testing on it today.

Thanks!!!
Dave



-- 
Dave Weis
515-224-9229
djweis at internetsolver.com
http://www.internetsolver.com/ 
Please check out our Complete Support Service 
http://www.internetsolver.com/completesupport/ 

 

> -----Original Message-----
> From: Tony [mailto:td_miles at yahoo.com] 
> Sent: Monday, December 20, 2010 4:37 PM
> To: 'cisco-nsp at puck.nether.net'; Dave Weis
> Subject: Re: [c-nsp] ATM Subinterface QoS
> 
> Hi Dave,
> 
> As others have suggested the shaping is done by the ATM 
> sub-interface and so you don't need the parent shaper policy 
> (and as you've found out, you cannot apply this setup).
> 
> The correct config for you would be:
> 
> 
> interface ATM4/0.605 point-to-point
> pvc 5/45
>   vbr-nrt 1536 1536
>   service-policy out OUTPUT-POLICER
> 
> 
> 
> regards,
> Tony.
> 
> 
> 
> 
> --- On Tue, 21/12/10, Dave Weis <djweis at internetsolver.com> wrote:
> 
> > From: Dave Weis <djweis at internetsolver.com>
> > Subject: [c-nsp] ATM Subinterface QoS
> > To: "'cisco-nsp at puck.nether.net'" <cisco-nsp at puck.nether.net>
> > Received: Tuesday, 21 December, 2010, 2:51 AM
> > 
> > I'm trying to get QoS on a subinterface of an OC3 to work 
> correctly. I 
> > have been able to get it working for PPPoA interfaces in 
> the past but 
> > the same method isn't working for me.
> > 
> > This is how I have things declared:
> > 
> > class-map match-all VOIP-TRAFFIC
> >  match access-group name MY-VOICE
> > !
> > !
> > policy-map OUTPUT-POLICER
> >  class VOIP-TRAFFIC
> >   priority 100
> >   set dscp ef
> >  class class-default
> >   fair-queue
> > policy-map MAP-1536-OUT
> >  class class-default
> >   shape average 1536000
> >   service-policy OUTPUT-POLICER
> > policy-map MAP-3072-OUT
> >  class class-default
> >   shape average 3072000
> >   service-policy OUTPUT-POLICER
> > policy-map MAP-256-OUT
> >  class class-default
> >   shape average 256000
> >   service-policy OUTPUT-POLICER
> > 
> > ip access-list standard EVERYTHING
> >  permit any
> > !
> > ip access-list extended MY-VOICE
> >  permit ip x.x.x.0 0.0.0.63 any
> > 
> > interface ATM4/0.605 point-to-point
> >  description FCP 3 Admin
> >  ip address 192.168.110.9 255.255.255.252  pvc 5/45
> >   protocol ip 192.168.110.10
> >   broadcast
> >   encapsulation aal5snap
> >  !
> > 
> > Trying to add service-policy output MAP-1536-OUT to the 
> subinterface 
> > gives me the error GTS : Not supported on this interface If 
> I add it 
> > to the PVC I get the error GTS : Not supported over ATM VCs
> > 
> > Thanks for any help. I have done a lot of research and googling but 
> > have not had any luck finding something that will work for 
> me. This is 
> > running on a 7200 12.4 with a PA-A3-OC3SMI and a NPE-GE1.
> > 
> > Dave
> > 
> > 
> > 
> > 
> 
> 
>       
>