[c-nsp] Problem with Cisco 4900M and SFP-H10GB-CU1M-G cable

[Tony Varriale]

----- Original Message ----- 
From: "Jose Madrid" <jmadrid2 at gmail.com>
To: <cisco-nsp at puck.nether.net>
Sent: Thursday, December 30, 2010 12:08 PM
Subject: [c-nsp] Problem with Cisco 4900M and SFP-H10GB-CU1M-G cable


>I have a Cisco 4900M with the OneX adapter module (CVR-X2-SFP10G).  I am
> trying to use a generic twinax cable (SFP-H10GB-CU1M-G) and am getting
> errors.  I was hoping someone on this list could point me in the right
> direction on solving this issue.  What I am getting is the following:
> " %C4K_GLMMAN-3-NONSFPPLUSINONEXCONVERTERHOLE: Non-SFP+ inserted in port
> Te1/2 ( 1 ), which is for 10G SFP+ OneX Converter."  Seems pretty
> self-explanatory except that the vendor has told me that it is indeed an
> SFP+ module.  I have tried service unsupported-transceiver and still
> nothing.  Any ideas?
>
> -- 
> It has to start somewhere, it has to start sometime.  What better place 
> than
> here? What better time than now?


I assume the G on your SPF part number was just a typo.

Assuming the OneX is good, if I had to guess code on 4900M?  What rev you 
running?

Or, the rev on the SPF.

tv