[c-nsp] Problem with Cisco 4900M and SFP-H10GB-CU1M-G cable

[Jose Madrid]

I upgraded the device to 12.2(54)SG.

On Thu, Dec 30, 2010 at 1:27 PM, Tony Varriale <tvarriale at comcast.net>wrote:

>
> ----- Original Message ----- From: "Jose Madrid" <jmadrid2 at gmail.com>
> To: <cisco-nsp at puck.nether.net>
> Sent: Thursday, December 30, 2010 12:08 PM
> Subject: [c-nsp] Problem with Cisco 4900M and SFP-H10GB-CU1M-G cable
>
>
>
>  I have a Cisco 4900M with the OneX adapter module (CVR-X2-SFP10G).  I am
>> trying to use a generic twinax cable (SFP-H10GB-CU1M-G) and am getting
>> errors.  I was hoping someone on this list could point me in the right
>> direction on solving this issue.  What I am getting is the following:
>> " %C4K_GLMMAN-3-NONSFPPLUSINONEXCONVERTERHOLE: Non-SFP+ inserted in port
>> Te1/2 ( 1 ), which is for 10G SFP+ OneX Converter."  Seems pretty
>> self-explanatory except that the vendor has told me that it is indeed an
>> SFP+ module.  I have tried service unsupported-transceiver and still
>> nothing.  Any ideas?
>>
>> --
>> It has to start somewhere, it has to start sometime.  What better place
>> than
>> here? What better time than now?
>>
>
>
> I assume the G on your SPF part number was just a typo.
>
> Assuming the OneX is good, if I had to guess code on 4900M?  What rev you
> running?
>
> Or, the rev on the SPF.
>
> tv
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
It has to start somewhere, it has to start sometime.  What better place than
here? What better time than now?