[c-nsp] WS-X6748-SFP input errors

[Tim Durack]

On Fri, Feb 5, 2010 at 10:42 AM, Matlock, Kenneth L
<MatlockK at exempla.org> wrote:
> Can you paste in the full 'show int', my guess is you're getting input
> buffer failures (need to see the 'Input Queue' line in particular).

sh int g1/9
GigabitEthernet1/9 is up, line protocol is up (connected)
  Hardware is C6k 1000Mb 802.3, address is 001e.1357.fbd0 (bia 001e.1357.fbd0)
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 1000Mb/s, media type is LH
  input flow-control is off, output flow-control is off
  Clock mode is auto
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:00, output 00:00:23, output hang never
  Last clearing of "show interface" counters 01:05:50
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 4572000 bits/sec, 1295 packets/sec
  5 minute output rate 6576000 bits/sec, 1271 packets/sec
     2841615 packets input, 1464896475 bytes, 0 no buffer
     Received 9233 broadcasts (4717 multicasts)
     0 runts, 0 giants, 0 throttles
     4101 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     2471204 packets output, 1795192240 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out


-- 
Tim:>
Sent from Brooklyn, NY, United States