[c-nsp] Renumbering serial interfaces

Gert Doering gert at greenie.muc.de
Wed Feb 17 15:30:57 EST 2010


On Wed, Feb 17, 2010 at 11:19:31AM -0700, james edwards wrote:
> I have a bunch of T-1 (ATM) interfaces that I need to renumber. I have
> always done this with 2 people, one on each end. Is it possible for one
> person to do this, from one end ?
> If I am on the near side, I log into the far sides serial IP and do this:
> LALMR_2620(config)#interface ATM0/0.32 point-to-point
> LALMR_2620(config-subif)#ip address
> LALMR_2620(config-subif)#^Z

Should work.  (At that point, the connection will lock up, and then you
need to connect to the new address and continue)

Always remember to put in "reload in 5" before you do anything that might
lock you out, and "reload cancel" afterwards...

USENET is *not* the non-clickable part of WWW!
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20100217/6d2db2ce/attachment.bin>

More information about the cisco-nsp mailing list