[c-nsp] [cisco-voip] FW: Getting Unity to work when in SRST mode.

[Matthew Saskin]

The only thing I can offer to this is good luck getting RDNIS to work.  I
can't recall once where I've seen RDNIS make it all the way through the PSTN
cloud to the site hosting Unity.

Matthew Saskin
msaskin at gmail.com
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin


On Fri, Feb 19, 2010 at 10:25 AM, Leslie Meade <lmeade at signal.ca> wrote:

>
>
>
>
> One way it can be done, depending on how many people need voicemail while
> the link is down, as it uses spare DID’s
>
>
>
> Is to change the outbound calling number to a DID that is not in use and
> when it hits your gateway/callmanager use a translation pattern to change
> the calling number back into their local. Since the link is down the default
> (if you got it setup) it to on fail goto voicemail.
>
>
>
> Example CME user has ext 2106 , get the dial plan to ring the “new DID”
> 604-345-5670, when it rings this number make a translation pattern to change
> it  back into 2106.
>
> But this depends on how many unused DID’s you got and how many people. It
> is not very scalable buy it gets around the RDNIS issues and it works.
>
>
>
> Leslie
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/