[c-nsp] Display nei as name in 'sh ip bgp sum'

[Arda Balkanay]

AFAIK it is not possible by default show commands, but first thing coming
into mind is using embedded event managers for this. This may be possible by
modifying the output of a show ip bgp summary command by eem scripts.

good examples are at : http://blog.ioshints.info/search/label/EEM



On Fri, Feb 19, 2010 at 11:01 PM, Steve Bertrand <steve at ibctech.ca> wrote:

> Is there a way to have a Cisco format the output of a "show ip bgp
> summary" to replace the neighbour IP with a name as opposed to the
> IP(v6) address of the neighbour?
>
> I haven't been able to find any docs in this regard.
>
> It's only one more step to "sh ip bgp nei xxxx", but I thought that if
> it was possible, viewing the name of the neighbour in the summary could
> save a step in many cases.
>
> Steve
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>