[c-nsp] Cisco 3620 and WIC-1ADSL
Chris Knipe
savage at savage.za.org
Thu Jan 7 01:17:49 EST 2010
Hi,
I have a C3620 with 2 ADSL WICs inside a NM-1FE2W (which is supposed to be
confirmed working). After lots of googling, I read much controversy about
what is supposed to work and what not, both in terms of hardware, as well as
software versions. From my understanding, I am running a IOS which is
supposed to be supported.
Before I upgraded (old IOS), the WIC-1ADSL cards was not detected. Now,
both cards are detected, but I still do not have any ATM interfaces
available. I would appreciate it if anyone can point me in the right
direction please - or, do I have a oversized paper weight here?
sh ver and sh diag below.
Many thanks,
Chris.
cpt-cc-core01#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-I-M), Version 12.3(21), RELEASE SOFTWARE (fc2)
cpt-cc-core01#sh diag
Slot 0:
NM-1FE2W Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-04796-01
Board Revision : F0
Deviation Number : 0-8707
Fab Version : 05
PCB Serial Number : JAD05350Y3U
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : NM-1FE2W=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 D7 41 01 00 C0 46 03 20 00 12 BC 01
0x10: 42 46 30 80 00 00 22 03 02 05 C1 8B 4A 41 44 30
0x20: 35 33 35 30 59 33 55 03 00 81 00 00 00 00 04 00
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0:
DSL SAR (ADSL)
Hardware Revision : 2.3
Part Number : 73-4771-09
Board Revision : C0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : FOC10161M3C
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : PA-1C-P=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 09 42 43 30
0x10: 80 00 00 00 00 02 05 C1 8B 46 4F 43 31 30 31 36
0x20: 31 4D 33 43 03 00 81 00 00 00 00 04 00 FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 1:
DSL SAR (ADSL)
Hardware Revision : 2.3
Part Number : 73-4771-08
Board Revision : B0
Deviation Number : 0-0
Fab Version : 05
PCB Serial Number : FOC07330WL9
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Product (FRU) Number : PA-1C-P=
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 2E 41 02 03 82 49 12 A3 08 42 42 30
0x10: 80 00 00 00 00 02 05 C1 8B 46 4F 43 30 37 33 33
0x20: 30 57 4C 39 03 00 81 00 00 00 00 04 00 FF FF FF
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
More information about the cisco-nsp
mailing list