[c-nsp] Renumber of DSL.

[Antonio Querubin]

On Mon, 11 Jan 2010, Keith wrote:

> But now I just realized just change the IP address on the ATM
> sub-interface on the router and get the customer to renumber to the new
> IP. No changing of PVC's needed.
>
> There is another faste interface on the 7204 that would connect to a new
> switch which goes out to a new upstream that the new block of IP's would
> route and would allow customers to use the old IP blocks until we get them
> to renumber.

Just add the new address as a primary and make the old address secondary. 
Then when the customer is done renumbering just delete the secondary 
address.

Antonio Querubin
808-545-5282 x3003
e-mail/xmpp:  tony at lava.net