[c-nsp] how to connect vss-setup via mpls core
Arne Larsen / Region Nordjylland
arla at rn.dk
Sun Jan 17 02:40:41 EST 2010
Hi Arie.
Sorry for not explaining the setup in detail. But anyway this is the case.
layer2 sw ---6500 6500 --- layer2 sw
| > vss1 - (MPLS-Core) - vss2 <
layer2 sw ----6500 6500 -- layer2 sw
Each site has a full vss environment with it's own local layer 2 switches.
What I'll like to able to do is, setup a few Vlan's on both sites that can host servers on the same broadcast domain.
Further more I'll like to able to announce the layer3 connection on the Vlan via bgp to our costumers.
How is it possible to enable a layer3 interface on the Vlan in each local site and run eompls or vpls between the 2 sites on layer2 .
Arne
-----Oprindelig meddelelse-----
Fra: Arie Vayner (avayner) [mailto:avayner at cisco.com]
Sendt: 16. januar 2010 21:08
Til: Arne Larsen / Region Nordjylland; cisco-nsp at puck.nether.net
Emne: RE: [c-nsp] how to connect vss-setup via mpls core
Arne,
Why would you want to do that in such a way?
In order to get the real benefit of VSS you would need all the access switches connected to both VSS nodes, which would require links from DC1 to DC2 per each access switch...
The same would apply to upstream Layer 3 connectivity...
If you do not plan to have this kind of a full mesh, then why would you want to use VSS in the first place.
With regards to layer 2 interconnect between DCs, this is a very common design nowadays, and MPLS is used in many solutions.
I suggest you take a look at this link:
http://www.cisco.com/en/US/netsol/ns975/index.html (take a look at the whitepaper).
Also, there is a very good Cisco Press book about this whole subject:
http://www.ciscopress.com/bookstore/product.asp?isbn=9781587059926
In the coming Networkers event in Barcelona there would be a few sessions about this, and a number of people in Meet the Engineer venue which can help with this subject.
Arie
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Arne Larsen / Region Nordjylland
Sent: Saturday, January 16, 2010 17:31
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] how to connect vss-setup via mpls core
Hi all.
I need an advice.
Is there a way to connect 2 vss-setup's with out using direct fibers on layer 2 I would like the to sites to connect via our mpls cloud, so that vlan's configured on the boxes can reach each other on layer2 and be able top announce the layer3 network via bgp on both sites.
If vlan 200 is configured on both sites, is it possible to use eompls to connect these 2, and make them active/stanby to each other on layer3 using vrrp or hsrp.
I been searching the cisco web for doc. But all I can find is only useable on layer2.
/Arne
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list