[c-nsp] HWIC-4ESW (routed ports - basic question??)

[Bob Arthurs]

hi all,

I'm just about to install some HWIC-4ESW into our 3800s on some customer sites and I have a quick question - couldn't find a clear answer on cco.

Can I configure the Ethernet ports on the HWIC-4ESW as routed ports (no switchport)? Or do I have to configure SVIs and then assign the ports to the SVI associated VLANs?

I want to avoid the extra config with SVIs and keep it simple with routed ports if at all possible.

Thanks for any help in advance.




 		 	   		  
_________________________________________________________________
Send us your Hotmail stories and be featured in our newsletter
http://clk.atdmt.com/UKM/go/195013117/direct/01/