[c-nsp] cisco 2801 and HWIC-2T

[Ryan West]

Flokuehn,

> -----Original Message-----
> Sent: Monday, January 18, 2010 10:17 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] cisco 2801 and HWIC-2T
> 
> Hi.
> 
> is there anything special i need to look for, while i want to confiugre
> an
> hwic-2t, controller e1? on an 2801 with ios12.4(25b) iam not able to
> use,
> either the
> command controller e1 nor card type ... does anybody have a clue?
> 
> Further there are confusing information from cisco.
> Following the mentioned link you will find the HWIC-2T supported by
> 2801.
> 
> http://www.cisco.com/en/US/prod/collateral/modules/ps5949/datasheet_c78
> -491363.html
> 
> But, following this link you will find the HWIC-2T not explicitly
> supported.
> 
> http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note
> 09186a00800b0858.shtml
> 
> Can anybody tell me if it is possible to use the HWIC-2T with the
> mentioned
> IOS version and Hardware?
> 

The card is supported on your platform, but it's a T1 only card, so controller e1 or card type won't work for it.

http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_modules.html

Thanks,

-ryan