[c-nsp] MPLS - CE to CE throughput

[Arie Vayner (avayner)]

Jack,

A very simple and dirty hack to fill a (relatively slow) link with one
way traffic is to run lots of pings with large packet size with timeout
delay  of 0. This would pump the ping requests into the link and would
fill it up...

For 2Mbps links you could also just run an FTP session...

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jack daniels
Sent: Monday, January 18, 2010 18:58
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] MPLS - CE to CE throughput

Hi guys,

I want to check the throughout in scenario

CE1-----MPLS cloud ----CE2


CE1 link is 2 Mbps
CE2 link is 2Mbps

If CE1 pumps 2Mbps then want to check if CE2 recieves it.
Is there any s/w to genrate traffic at CE1 ?  OR any other method ?


Regards
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/