[c-nsp] MPLS - CE to CE throughput
John P. Schneider
johnps at IowaTelecom.com
Mon Jan 18 13:50:48 EST 2010
I would suggest looking into iperf/jperf. It can be found at sourceforge.net/projects/iperf/
Thank You,
John
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Arie Vayner (avayner)
Sent: Monday, January 18, 2010 11:47 AM
To: jack daniels; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] MPLS - CE to CE throughput
Jack,
A very simple and dirty hack to fill a (relatively slow) link with one way traffic is to run lots of pings with large packet size with timeout delay of 0. This would pump the ping requests into the link and would fill it up...
For 2Mbps links you could also just run an FTP session...
Arie
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jack daniels
Sent: Monday, January 18, 2010 18:58
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] MPLS - CE to CE throughput
Hi guys,
I want to check the throughout in scenario
CE1-----MPLS cloud ----CE2
CE1 link is 2 Mbps
CE2 link is 2Mbps
If CE1 pumps 2Mbps then want to check if CE2 recieves it.
Is there any s/w to genrate traffic at CE1 ? OR any other method ?
Regards
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
More information about the cisco-nsp
mailing list