[c-nsp] show proc cpu vs snmp cpu monitoring

[Tassos Chatzithomaoglou]

"sh proc cpu" for RP
"rem com sw sh proc cpu" for SP
"sh plat hard capa cpu" for both

--
Tassos

Anthony Fajri wrote on 23/01/2010 19:58:
> Hi there,
>
> on WS-SU720-3BXL, there are 2 processors, which are route processor and
> switch processor.
> if we monitor it by snmp, there are 2 result: CPU of routing and CPU of
> switching.
>
> if I did: show proc cpu, which one is shown in the result? CPU of routing,
> CPU of switching, or sum of both?
> I realize that the result of show proc cpu is more similar to the sum of
> both.
>
> I've tried to search the info on cisco website, but can't get useful
> information on it.
>
> thanks and regards,
>
> -----
> Anthony Fajri
> http://fajri.freebsd.or.id
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>