[c-nsp] port-channel help (warning, might be dumb)

[Randy McAnally]

Whoops, no I didn't...

LACP isn't a requirement (and is not configured on the foundry), so if I
remove the LACP line and set the channel mode to 'on' instead of 'active'
would that work?  I could have sworn I had it working in the lab without LACP...

--
Randy

---------- Original Message -----------
From: Alan Buxey <A.L.M.Buxey at lboro.ac.uk>
To: Randy McAnally <rsm at fast-serv.com>
Cc: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
Sent: Thu, 28 Jan 2010 21:38:11 +0000
Subject: Re: [c-nsp] port-channel help (warning, might be dumb)

> Hi,
> 
> > Foundry config:
> > 
> > trunk ethe 1 to 2
> > trunk deploy
> 
> foundry does LACP... did you do
> 
> link-aggregate active
> 
> on the foundry?
> 
> alan
------- End of Original Message -------