[c-nsp] port-channel help (warning, might be dumb)

[Alan Buxey]

Hi,
> Whoops, no I didn't...
> 
> LACP isn't a requirement (and is not configured on the foundry), so if I
> remove the LACP line and set the channel mode to 'on' instead of 'active'
> would that work?  I could have sworn I had it working in the lab without LACP...

channel-mode 'on' is the 'just do it and forget about setup/discussion protocols..
its the method recommended for connecting random other systems - eg VMWare multi-link
etc.... its worth a go

alan