[c-nsp] 7600 Rate Limiting Output

[Kevin Warwashana]

Actually I am using a SIP-600 with a SPA-5X1GE.

Kevin


-----Original Message-----
From: Pavel Skovajsa [mailto:pavel.skovajsa at gmail.com] 
Sent: Saturday, January 30, 2010 1:08 PM
To: Kevin Warwashana
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7600 Rate Limiting Output

Hi,

It looks like you are trying to configure this on the WS-X67xy cards,
which are basically the LAN/DC cards taken from 6500. These cards have
very limited QoS capabilities as they are targetted for LAN/DC
segment, not for service provider. Hence you cannot expect MUCH.

If you need sophisticated QoS you should buy ES20 or ES+
(http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_c78-549
419.html).

To give you some hope, many people have fallen into this "trap" (me
for example, there are much much more things the WS-X67xy cards cannot
do), and it is simply due to not reading the documentation before
buying. There is a nice explanation of the 6500/7600 hardware based
QoS on http://www.networkworld.com/community/node/43764

-pavel







On Thu, Jan 28, 2010 at 11:10 PM, Kevin Warwashana <kevinw at telnetww.com>
wrote:
> Anyone have a suggestion/comment?
>
> Thanks,
> Kevin
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Kevin Warwashana
> Sent: Saturday, January 23, 2010 10:47 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 7600 Rate Limiting Output
>
> I was curious what is the best way to limit bandwidth in/out with policy
> maps.  I can apply this inbound on a subinterface:
>
>
>
> policy-map 26MB-INPUT
>
>  class class-default
>
>   police rate 26000000 bps
>
>     conform-action transmit
>
>     exceed-action drop
>
>
>
> but the below won't apply in the outbound direction:
>
>
>
> policy-map 26MB-OUTPUT
>
>  class class-default
>
>   police rate 26000000 bps
>
>     conform-action transmit
>
>     exceed-action drop
>
>
>
> Gives me:
>
>
>
> int gig4/0/0.8
>
> service-policy output 26MB-OUTPUT
>
> Police and strict priority must be configured together for egress QOS.
>
> Invalid feature combination for the class class-default
>
> Configuration failed
>
>
>
> Any help would be appreciated!  I miss the rate-limiting command from 7200
> routers :).
>
>
>
> Kevin
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>