[c-nsp] bandwidth statement on interface to match shaped value?

[Benjamin Lovell]

The bandwidth statement just alters the EIGRP bandwidth metric. So if  
you are using EIGRP and want it to reflect the true bandwidth of the  
link, then yes. Else it does not matter.

-Ben

On Jul 1, 2010, at 10:43 AM, Roger Wiklund wrote:

> Hi
>
> When using a physical interface of 100meg with an outbound policy- 
> map that
> shapes all traffic to 30meg, should the bandwidth of the physical  
> interface
> reflect the shaped value?
>
> The policy-map is also using remaining bandwidth percentage x for  
> different
> classes.
>
> I would assume you want the percentage level to calculate based on the
> 30meg, rather than on the 100meg right?
>
> Thanks!
>
> Regards
> Roger
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/