[c-nsp] bandwidth statement on interface to match shaped value?

John Neiberger jneiberger at gmail.com
Thu Jul 1 12:38:26 EDT 2010


> "CBWFQ provides several variations of how to configure the bandwidth
> reserved for each queue. For instance, the bandwidth 64 class subcommand
> reserves 64kbps of bandwidth, regardless of the bandwidth setting on
> interface. The Bandwidth percent 25 class subcommand would also reserve 64
> kbps for a class if the interface bandwidth had been set to 256kbps, using
> the bandwidth 256 interface subcommand."
>
> >From that is seems crystal clear the the bandwidth statement on the
> interface IS used for QoS. And this back to my question, should I set the
> bandwidth on the Interface to match the shaped value?
>
> Thanks!

If you're shaping everything to a lower rate, I think it makes sense
to change your bandwidth statement.


More information about the cisco-nsp mailing list