[c-nsp] 7206 and STM-1

[Bøvre Jon Harald]

Here is a show version from one of our 7200 G2:
ATM STM-1 card placed in slot 2 and 3

PCI bus mb1 (Slots 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb1 has a total of 300 bandwidth points. 
This configuration is within the PCI bus capacity and is supported. 

PCI bus mb2 (Slots 2, 4 and 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 300 bandwidth points.
This configuration is within the PCI bus capacity and is supported. 

Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.


1 FastEthernet interface
3 Gigabit Ethernet interfaces
2 ATM interfaces
2045K bytes of NVRAM.

3 STM-1 should be OK, as long as cards are distributed left/right and no other cards in chassis.

Jon


________________________________________
Fra: cisco-nsp-bounces at puck.nether.net [cisco-nsp-bounces at puck.nether.net] p&#229; vegne av RAZAFINDRATSIFA Rivo Tahina [r.tahina at moov.mg]
Sendt: 6. juli 2010 08:34
Til: cisco-nsp at puck.nether.net
Emne: [c-nsp] 7206 and STM-1

Hi all,

We plan to use a 7204 NPE-G2 with 3 STM-1 (PA-POS-OC3SMI ),
will the 7206 NPE-G2 support 3x155Mbps traffic?

Regards.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/