[c-nsp] [rancid] Cisco L2tp class with password and rancid

[Martin Moens]

Thanks guys...

I was afraid I would hear your "solutions"
I think I will try to persuade Cisco to solve this issue, and in the mean
time have Rancid ignore the level 7's :-(

Martin


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alan Buxey
> Sent: 05/07/2010 19:49
> To: David Freedman
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] [rancid] Cisco L2tp class with password 
> and rancid
> 
> Hi,
> 
> > > I have an issue when I configure a l2tp-class with a 
> password in it, every
> > > time I do a "sho run" the level 7 encrypted password is 
> shown differently.
> > > When using Rancid for config backups, every time Rancid 
> runs I receive a
> > > complaint my config has "changed".
> 
> I've had this issue with several devices and its been fixed by cisco.
> 
> recently, however, have had the same with the level 7 password
> for energywise.  the 'fix' is to not have it encrypted in the config
> and save it as plain text (level 0) - thats not acceptable.  you'll
> have to do what i did - reconfigure rancid to ignore that value.
> 
> 
> alan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>