[c-nsp] issue with basic access-list reordering

[Ruben Alvarez]

Thanks.  That sort of worked.  I was doing a 'no access-list 10' before I added the new list.  But this time I reordered them and it worked.  So I added the remark, added .154, then added .151.  weird.

Ruben Alvarez
Technical Contractor  |  NWEA

PHONE 503.624.1951  |  FAX 503.639.7873
DIRECT 503.214.4228

NWEA.ORG |  Partnering to Help All Kids Learn


-----Original Message-----
From: Gary Buhrmaster [mailto:gary.buhrmaster at gmail.com] 
Sent: Wednesday, July 07, 2010 11:38 AM
To: Ruben Alvarez
Subject: Re: [c-nsp] issue with basic access-list reordering

> I wanted to see if anyone knows what's going on with my basic access-list.  It's really more annoying than anything, but.  So I type in this list:
>
> Rtr (config) #access-list 10 remark NTP access
> Rtr (config) #access-list 10 permit 10.1.0.151
> Rtr (config) #access-list 10 permit 10.1.0.154
> Rtr (config) #exit
> Rtr#sh run | inc access-list
> access-list 10 permit 10.1.0.154
> access-list 10 remark NTP access
> access-list 10 permit 10.1.0.151
>
> Does anyone know why this happens?  It's driving me crazy.

Add in a "no access-list 10" before your config
command..  Your statements are added to the existing
config, but duplicates are not, and my guess is
that you had a ....permit 10.1.0.154... before.
So, start clean with a "no access-list 10".