[c-nsp] Cisco 6506 Possible Backplane failure

[Chris Gotstein]

We have a Cisco 6506 switch that has 2 SUP2's and 2 other line cards
installed.  Tonight, the 2 line cards failed and were shutdown by the
switch.  Pulled the cards, reseated them, and they came back up.
Decided to power off the unit completely just to be sure everything was
reset and good to go.  Came back up, but some modules failed to start on
the first attempt, even the backup SUP2 needed 2 tries to come up.
Eventually everything came back, and we are back up and running.  Does
this point to a faulty backplane and i should replace the chassis, or
could it be something else?

-- 
---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | chris at uplogon.com