[c-nsp] Cisco 6506 Possible Backplane failure

[Chris Gotstein]

Looks like it may have been a bad line card.  Seeing the following error
Failed SCP dnld


---- ---- ---- ----
Chris Gotstein, Network Engineer, U.P. Logon/Computer Connection U.P.
http://uplogon.com | +1 906 774 4847 | chris at uplogon.com

On 7/13/2010 8:53 PM, Chris Gotstein wrote:
> We have a Cisco 6506 switch that has 2 SUP2's and 2 other line cards
> installed.  Tonight, the 2 line cards failed and were shutdown by the
> switch.  Pulled the cards, reseated them, and they came back up.
> Decided to power off the unit completely just to be sure everything was
> reset and good to go.  Came back up, but some modules failed to start on
> the first attempt, even the backup SUP2 needed 2 tries to come up.
> Eventually everything came back, and we are back up and running.  Does
> this point to a faulty backplane and i should replace the chassis, or
> could it be something else?
>